Global Building and Design Directory is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Armatherm™ FRR Structural Thermal Break Material

Armatherm™ FRR structural thermal break material provides a combination of low thermal conductivity and high compressive strength and has been used in hundreds of structural steel framing connections transferring load in moment and shear conditions. Armatherm™ FRR thermal break material can support up 40,000 psi and has an R value of 0.9 per inch. The material is made of a reinforced, thermoset resin which is fire resistant and has very limited creep under load, making it the ideal material for use in structural steel and façade thermal break connections.

Washer and Bushings using Armatherm™ Thermal Insualtion Material (TIM)

With a bolt through insulation pad there is a slight thermal transfer along the connecting bolt.

To further reduce heat loss, Armatherm™  bushings and washers can be used on the warm face of the structure. A thermal break at the bolt connection will reduce heat loss an additional 4% per bolt depending on the wall assembly construction.

In extreme applications (e.g. Indoor Swimming Pools), to prevent condensation on the bolt head, a polyurethane nut cap can be supplied to effectively screen this cold surface from the internal environment.

Armatherm™ Thermal Break Pads are often called, Thermal Bridges, balcony isolators, structural thermal breaks, cantilever steelwork thermal bridging, cold bridge isolation, thermal partitions,   steelwork thermal break, thermal bridging, cold bridging pads, cold bridging solutions. All of these solutions use Themal Insulation Material TIM to prevent thermal bridging.

View this product at armatherm.com