Global Building and Design Directory is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

10 AWG FR-XLPE PVC Jacket, 600V

10 AWG FR-XLPE PVC Jacket, 600V

Applications As flame-retardant multi-conductor control, signal or power cables rated 600 volts, 90 ºC in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Also approved for use in Class I remote-control and signaling circuits per Article 725 of the NEC. Type TC cable is suitable for use in Class I and II, Division 2 hazardous locations. Cables may be installed in air, in ducts or conduits, in tray or trough, and are suitable for direct burial. Construction Stranded uncoated copper conductors, 30 mils FR-XLPE flame-retardant crosslinked polyethylene insulation, color coded, two conductors flat, three or more conductors twisted with suitable fillers where necessary to make round, cable tape, PVC jacket overall, surface printed. Standards Listed by UL as Type TC per Standard 1277 for Tray Cables. Cables UL listed for Direct Burial. Individual conductors pass UL VW-1 flame test. Individual conductors UL listed as Type XHHW-2. Overall jacket UL listed as Sunlight Resistant. Cables with grounding conductor UL listed for Open Wiring. Cables pass IEEE-383 ribbon burner flame test and ICEA 210,000 BTU/hour test. Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test. Cables meet requirements of ICEA S-73-532, NEMA WC70 for Control Cables. Notes Cables may be supplied with an insulated ground and marked ""Open Wiring."" Standard color coding is Method 1 for NEC applicatio

View this product at wire.buyawg.com